Adaptec SAS RAID Controllers Instalační příručka stáhnout pdf (Strana 40)

26 Sun StorageTek SAS RAID HBA Installation Guide • March 2010

▼ To Prepare the HBA for Removal

1. If the computer is running the OS, halt all I/O activity to the HBA.

2. Complete all transactions being done by the HBA such as migrations, rebuilds,

verifications, and so on.

3. Properly log out of the OS and shut down the computer.

4. Unplug the computer.

5. Open the computer chassis and disconnect the SAS/SATA cable(s) from the

HBA.

▼ To Remove the HBA

1. Remove the retention mechanism (screw, clip, and so on) that is securing the

HBA bracket to the chassis.

2. Hold the upper portion of the bracket with one hand and the rear of the HBA

with the other hand.

3. Pull straight up until the HBA clears the PCI Express* expansion slot.

4. Lift the HBA from the computer chassis.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 147 148

Žádné komentáře

Adaptec SAS RAID Controllers Instalační příručka Strana 40