Adaptec SAS RAID Controllers Instalační příručka stáhnout pdf (Strana 23)

CHAPTER

Hardware Installation and Removal

This chapter explains how to install and remove the HBA, and how to install and

connect internal disk drives.

This chapter contains the following sections:

■ “Observing ESD and Handling Precautions” on page 9

■ “To Prepare for Hardware Installation” on page 10

■ “To Install the Battery Backup Module” on page 15

■ “To Install the HBA” on page 17

■ “Connecting Disk Drives” on page 19

■ “Testing the HBA Installation” on page 20

■ “Removing the Hardware” on page 25

Observing ESD and Handling

Precautions

Caution – Damage to the HBA can occur as the result of careless handling or

electrostatic discharge (ESD). Always handle the HBA with care to avoid damage to

electrostatic sensitive components.

To minimize the possibility of ESD-related damage, use both a workstation antistatic

mat and an ESD wrist strap. You can get an ESD wrist strap from any reputable

electronics store or from Sun as part number #250-1007. Observe the following

precautions to avoid ESD-related problems:

■ Leave the HBA in its antistatic bag until you are ready to install it in the system.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 147 148

Žádné komentáře

Adaptec SAS RAID Controllers Instalační příručka Strana 23