Adaptec 2120S - SCSI RAID Controller Uživatelská příručka stáhnout pdf (Strana 76)

5-28

Adaptec SCSI RAID Software Reference Guide

AAC0>container create raid5 /stripe_size=64K /scrub

((0,02,0),10M) (0,03,0) (0,04,0) (0,05,0)

Executing: container create raid5 /stripe_size=65,536 /

scrub=TRUE ((CHANNEL=0,ID=2,LUN=0),10,485,760 )

(CHANNEL=0,ID=3,LUN=0) (CHANNEL=0,ID=4,LUN=0)

(CHANNEL=0,ID=5,LUN=0)

container 0 created

As the command executes, note that the title bar of the MS-DOS

window displays the status of the command. For example:

Stat:OK!Task:101,Func:R5S Ctr:0,State:RUN 84.6%

See page 3-10 for detailed information on the status information that

the command displays in the title bar as it executes the task.

On UNIX systems, the message displayed after you execute the

container create raid5 command includes the root special

file associated with the newly created RAID-5 set.

Use the container list

command after using the container

create raid5

command to display information about the RAID-5

set.

AAC0>container list

Executing: container list

Num Total Oth Stripe Scsi Partition

Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size

-- ----- ------ ------ --- ------ ------- ------ -------------

0 RAID-5 30.0MB 64KB None 0:02:0 64.0KB: 10.0MB

0:03:0 64.0KB: 10.0MB

0:04:0 64.0KB: 10.0MB

The following list describes the columns that contain information as

a result of creating a RAID-5 set with the container create

raid5

command:

■ The Num Label column displays the ID number of the newly

created RAID-5 set, which in the example is 0.

If you specify a label when creating the RAID-5 set, it appears

in this column. Because no label was specified when the RAID-

5 set was created, no label appears in the column.

On UNIX systems, the root special file associated with the

RAID-5 set also appears in this column.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 353 354

Žádné komentáře

Adaptec 2120S - SCSI RAID Controller Uživatelská příručka Strana 76