Adaptec 2120S - SCSI RAID Controller Uživatelská příručka stáhnout pdf (Strana 219)

7-19

disk Commands

disk show partition

To display a list of partitions on the disks attached to the currently

opened controller, use the disk show partition command.

Syntax

disk show partition

Examples

The following example shows a sample output from the disk show

partition command:

AAC0>disk show partition

Executing: disk show partition

Scsi Partition Array MultiLevel

C:ID:L Offset:Size Num Type Num Type R/W

------ ------------- --- ------ --- ------ ---

0:02:0 64.0KB:20.0MB 0 Volume 0 None RW

The following sections provide more information on the columns

that the disk show partition details command displays.

The SCSI C:ID:L Columns

The C:ID:L column displays the SCSI channel number, the SCSI

device ID, and the SCSI device logical unit number for each disk on

the currently opened controller.

In the example, the command displays the SCSI channel number,

the SCSI device ID, and the SCSI device logical unit number for one

disk (0:02:0) on the currently opened controller.

The Partition Offset:Size Column

The Partition Offset:Size column displays the offset (in bytes) into

the SCSI device and the size of the partition (in bytes). In the

example, the offset is 64.0 KB and the size is 20.0 MB.

If a partition is dead, the “:” (colon) in the Partition Offset:Size

column changes to a “!” (exclamation point). See the disk remove

dead_partitions (page 7-9) command for more information on

dead partitions.

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 353 354

Žádné komentáře

Adaptec 2120S - SCSI RAID Controller Uživatelská příručka Strana 219