Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Uživatelský manuál stáhnout pdf (Strana 22)

22 ASUS P2B-D/P2B-DS User’s Manual

III. INSTALLATION

CPU

III. INSTALLATION

5. Insert the SEC Cartridge: Push the SEC cartridge’s two locks inward until

you hear a click (the preceding picture shows the locks in the outward position

and inward in the picture below). With the heatsink facing the motherboard’s

chipset, press the cartridge gently but firmly until it is fully inserted. (NOTE:

The procedures shown here are for installing the AAVID heatsink with fan.)

IMPORTANT: If you are installing only one processor, you must install it in the SEC

slot for CPU 1 (slot closest to the external connectors). Then terminate the empty slot

with the ASUS C-P2T PC100 CPU termination card to maintain signal strength.

IMPORTANT: Use only the ASUS C-P2T PC100 CPU termination card (Rev. 1.02

or later) to terminate the empty slot.

6. Secure the SEC Cartridge: Secure the SEC cartridge in place by pushing the

SEC cartridge locks outward so that the lock shows through the retention

mechanism’s lock holes.

lock holes

Push lock inward

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 189 190

Žádné komentáře

Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Uživatelský manuál Strana 22