Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Uživatelský manuál

RP2B-D / P2B-DSDual Pentium® II MotherboardsUSER’S MANUALSpecial Features• P2B-DS• Adaptec 7890 SCSI Chipset• Adaptec 3860 SCSI Transceiver

10 ASUS P2B-D/P2B-DS User’s ManualIII. INSTALLATIONASUS P2B-D/P2B-DS Motherboard LayoutPWR_FANFS0FS1FS2USBPS/2353468353468RWake-On-LANHardwareMonitorB

2-12Adaptec 7800 Family ManagerNote: Changes made with the Registry Editor do not take effect until you shut down and then restart your system.Using W

2-13Microsoft Windows NT Installation4If you are sure you are removing the correct host adapter type, click OK.5Return to Step 3 to remove driver supp

2-14Adaptec 7800 Family ManagerRemoving a Host Adapter in Windows NT 4.01From the Control Panel, double-click the SCSI Adapters icon.2Click the Driver

2-15Microsoft Windows NT InstallationSwapping a Host AdapterSwapping a 7800 Family host adapter for a non-7800 Family host adapter is similar to the p

2-16Adaptec 7800 Family ManagerTroubleshootingProblems and SolutionsI made changes to the host adapter configuration and Windows NT no longer boots!Th

2-17Microsoft Windows NT Installationmonitoring) and the description of the event. The Data section of the Event Details dialog box displays the error

2-18Adaptec 7800 Family Manager[xxxxx012][xxxxxx99]Error issuing command. The driver does not recognize the target device.[xxxxx021]Device protocol er

2-19Microsoft Windows NT Installation[xxxxx081][xxxxxx8A][xxxxxx83]Adapter initialization failure. An error has occurred while the driver was setting

2-20Adaptec 7800 Family Manager[xxxxxd4]Adapter hardware failure - adapter reset. The host adapter hardware failed and the miniport has to reset the h

3-13▼ ▼ ▼ ▼Microsoft Windows 95 InstallationThis chapter explains how to install the Adaptec 7800 Family Manager Set aic78xx.mpd and aic78u2.mpd dr

ASUS P2B-D/P2B-DS User’s Manual 11III. INSTALLATIONJumpers1) CLRTC p. 13 Clear Real Time Clock (RTC) RAM2) KBPWR p. 13 Keyboard Power Up (Enable/Disab

3-2Adaptec 7800 Family ManagerInstalling the Driver When Installing Windows 95A version of the aic78xx.mpd (Ultra SCSI) driver is embedded (included)

3-3Microsoft Windows 95 InstallationNote: If Windows 95 cannot determine the type of host adapter installed in your computer, a yellow question mark l

3-4Adaptec 7800 Family ManagerUpdating the Driver for Windows 95 (Version OSR 2)This section covers the remaining steps for updating the drives on Win

3-5Microsoft Windows 95 InstallationTroubleshootingProblems and SolutionsWhat is a miniport driver, and how do I make sure that the miniport driver fo

3-6Adaptec 7800 Family Manager7You must restart your computer for the changes to take effect.What if a yellow exclamation mark or a red X appears in D

3-7Microsoft Windows 95 InstallationIf I am running under Windows 95, do I need lines for the Adaptec real mode ASPI drivers and mscdex in my config.s

3-8Adaptec 7800 Family ManagerMy CD-ROM drive shows up as more than one icon under My Computer.The mapping between mscdex, which runs in Real mode, an

4-14▼ ▼ ▼ ▼Novell NetWare InstallationThis chapter explains how to install the Adaptec 7800 Family Manager Driver aic7870.dsk (Ultra SCSI) or aic78

4-2Adaptec 7800 Family ManagerInstalling the Driver When Installing NetWareTo install the aic7870.dsk or aic78u2.ham driver when you install NetWare,

4-3Novell NetWare InstallationNetWare v4.0 or v4.1xFollow these instructions only if you are installing NetWare v4.0 or v4.1x for the first time:1Begi

12 ASUS P2B-D/P2B-DS User’s ManualIII. INSTALLATIONJumpersIII. INSTALLATIONInstallation StepsBefore using your computer, you must complete the follow

4-4Adaptec 7800 Family ManagerNote: To load the driver automatically at server bootup, make sure the startup.ncf file includes the load command line f

4-5Novell NetWare InstallationLoading the Driver at Server BootupTo automatically load the aic7870.dsk or aic78u2.ham at server bootup, the startup.nc

4-6Adaptec 7800 Family ManagerCommand line options are not case sensitive. Placing commas between command line options is optional. See Using the Load

4-7Novell NetWare InstallationUsing the Load Command Line OptionsYou can specify several command line options when the driver is loaded. The available

4-8Adaptec 7800 Family Managerext_tran= yes, no no Determines translation method for a new drive in the system; yes = extended, no = standard. By defa

4-9Novell NetWare Installationmultlun_targets 00-FFFF FFFF A bit mask to enable LUNs on selected targets. By default, LUNs on all targets are enabled.

4-10Adaptec 7800 Family ManagerTable of aic78u2.dsk Command Line Optionsslot= 0-xxxx20 Defines a physical slot number for the host adapter. If 0 is sp

4-11Novell NetWare Installationflush_diskreq= 0-FFFF 0 A bit mask to send occasionally ordered tags to specific targets. By default, no targets receiv

4-12Adaptec 7800 Family ManagerBit Mask OptionsUse the example below as an aid for calculating bit mask option hex values. Each SCSI device is enabled

4-13Novell NetWare InstallationUsing NetWare and the Host AdapterThis section contains useful information on using NetWare and your host adapter.Using

ASUS P2B-D/P2B-DS User’s Manual 13III. INSTALLATIONIII. INSTALLATIONJumpersJumper Settings1. Clear Real Time Clock (RTC) RAM (CLRTC)The CMOS RAM is p

4-14Adaptec 7800 Family ManagerMount StatusMounting causes a drive to come online as a NetWare storage device. Dismounted drives are inactive and cann

4-15Novell NetWare InstallationUsing the NetWare Tape BackupIncluded with Novell NetWare is a server-based tape backup utility called sbackup.nlm. Thi

4-16Adaptec 7800 Family ManagerUsing a CD-ROM with NetWareTo use a CD-ROM with NetWare v3.1x, v4.0, or v4.1x, follow these instructions:1Load aic7870.

4-17Novell NetWare InstallationOptimizing PerformanceThe Adaptec 7800 Family SCSI Bus Master firmware increases the SCSI performance of the Adaptec 78

4-18Adaptec 7800 Family ManagerTroubleshootingError MessagesThe error messages listed below are the messages associated with the aic7870.dsk or aic78u

4-19Novell NetWare Installation[xxxxx085] Unable to allocate memory This indicates that there may be a problem with the amount of memory installed in

4-20Adaptec 7800 Family Manager[xxxxx0a4] SCSI bus reset by third party hardwareHardware such as an array enclosure may have reset the SCSI bus. This

5-15▼ ▼ ▼ ▼IBM OS/2 InstallationThis chapter explains how to install the Adaptec 7800 Family Manager Set Driver for OS/2. The aic7870.add driver su

5-2Adaptec 7800 Family ManagerInstalling OS/2 v2.1x (Ultra SCSI Driver Only)Follow these instructions only if you are installing OS/2 v2.1x for the fi

5-3IBM OS/2 Installation4Copy the ibmint13.i13 and the aic7870.add files from the 7800 Family Manager Set diskette for OS/2 (i.e., \os2\aic7870\) onto

14 ASUS P2B-D/P2B-DS User’s ManualIII. INSTALLATIONJumpersIII. INSTALLATION3. CPU Bus Frequency (FS0, FS1, FS2)This option tells the clock generator

5-4Adaptec 7800 Family Manager2Delete some of the existing files on the backup copy of the OS/2 installation diskette #1 so that approximately 140 KBy

5-5IBM OS/2 Installation4For each driver removed from the OS/2 diskette #1, remove its corresponding line in the config.sys file (also on OS/2 diskett

5-6Adaptec 7800 Family ManagerNote: If these adapters are not deselected, the driver included on the CD-ROM will be copied over the driver being insta

5-7IBM OS/2 Installation7800 Family host adapter to your OS/2 computer, you need to install the driver. To do so, continue with Step 2:2Run the ddinst

5-8Adaptec 7800 Family ManagerUsing Command Line OptionsOnce installed, the aic7870.add or aic78u2.add driver does not usually require any modificatio

5-9IBM OS/2 Installation/pcihwPCI configuration hardware registers. Enables driver to access PCI configuration hardware registers. This switch is avai

5-10Adaptec 7800 Family Manager/sm:x,y,zEnables SCSI manager support for the target device(s) x,y,z. Allows os2scsi.dmd to control the specified targe

5-11IBM OS/2 InstallationCommand Line ExamplesExample 1Suppose that you have a removable-media drive as target 3. Normally os2dasd allocates this devi

5-12Adaptec 7800 Family ManagerTroubleshootingProblems and SolutionsHow do I assign an interrupt for the host adapter?The interrupt assignment is hand

5-13IBM OS/2 Installation[xxxxx081] Adapter software initialization failureAn error has occurred while the driver was setting up its internal data str

ASUS P2B-D/P2B-DS User’s Manual 155. Chassis Intrusion Sensor Setting (JP18) (optional/reserved)This allows you to disable or enable the chassis intru

5-14Adaptec 7800 Family Manager[xxxxx096] Adapter hardware initialization failure - possible resource conflict The driver has attempted to initialize

5-15IBM OS/2 Installation[xxxxx07c] Unable to allocate memory[xxxxx07d] Unable to allocate memory[xxxxx07e] Unable to allocate memory[xxxxx07f] Unable

6-16▼ ▼ ▼ ▼SCO UNIX InstallationThis chapter explains how to install the Adaptec 7800 Family Manager Set Driver alad or alad325 (for Ultra SCSI), a

6-2Adaptec 7800 Family ManagerInstalling the Driver When Installing SCO UNIXTo install the alad/alad325 or blad/blad325 drivers at the same time you i

6-3SCO UNIX Installation4Insert the requested volume (7800 Family Manager Set diskette for SCO UNIX) in the floppy drive and press Enter. Prompts simi

6-4Adaptec 7800 Family Manager8Type alad or blad and press Enter. The alad driver for your 7800 Family host adapter has been relinked to the SCO UNIX

6-5SCO UNIX Installation6If the driver is properly loaded, the following message appears:alad.alad:Loading module fd(52)/alad/driver/alad/Driver.o .te

6-6Adaptec 7800 Family ManagerNote: To update/install the driver, you must first enter the Single User Mode (System Maintenance Mode). Refer to the SC

6-7SCO UNIX InstallationUse the Install PackageTo load the driver using installpkg, follow these steps:1At the UNIX system prompt, type installpkg and

16 ASUS P2B-D/P2B-DS User’s Manual(This page was intentionally left blank.)

6-8Adaptec 7800 Family ManagerModify the mscsi FileIf necessary, to change your primary host adapter to a 7800 Family host adapter, follow these steps

6-9SCO UNIX Installation5Modify the mscsi file according to your hardware setup:– If you are booting from a 7800 Family host adapter, make sure the ho

6-10Adaptec 7800 Family ManagerBoot the New KernelTo reboot the computer with the new kernel, follow these steps:1Follow the onscreen instructions to

6-11SCO UNIX Installationpage 6-2), or update SCO UNIX with the new driver (see Installing the Driver When SCO UNIX is Already Installed on page 6-5).

6-12Adaptec 7800 Family ManagerExamples alad_parity[SCSI_NALAD]—specifies whether the host adapter checks parity on incoming SCSI data. If the second

6-13SCO UNIX InstallationTroubleshootingProblems and SolutionsIn SCO OpenServer 5, my system hangs after I have installed the driver and rebooted the

6-14Adaptec 7800 Family ManagerMy computer does not recognize my host adapter.During bootup, check to see if the BIOS message for your primary 7800 Fa

6-15SCO UNIX InstallationI am having problems booting the computer from a SCSI drive. Make sure your host adapter is installed and configured correctl

6-16Adaptec 7800 Family ManagerThe meaning of each field is as follows:– Host Adapter Prefix—Identifies the name of the host adapter driver. If you ar

6-17SCO UNIX InstallationMy computer crashes or displays panic messages during the bootup procedure.You may have to boot from the backup kernel create

ASUS P2B-D/P2B-DS User’s Manual 172. System Memory (DIMM)This motherboard uses only Dual Inline Memory Modules (DIMMs). Three socketsare available f

6-18Adaptec 7800 Family Manager[xxxxx09D] Unexpected interrupt The Adaptec driver received an interrupt from the system that does not correspond to an

7-17▼ ▼ ▼ ▼SCO UnixWare InstallationThis chapter explains how to install the Adaptec 7800 Family Managers Set Driver adsl20 or adsl (UltraSCSI) and

7-2Adaptec 7800 Family ManagerInstalling the Driver When Installing SCO UnixWareTo install the adsl20/adsl or adsb20/adsb drivers at the same time you

7-3SCO UnixWare InstallationNote: If your installation fails, do not attempt to use the update installation pkgadd procedure to fix the installation.

7-4Adaptec 7800 Family ManagerNote: Remember that SCO UnixWare commands are case sensitive. Enter the commands exactly as shown.Back Up the ComputerIf

7-5SCO UnixWare Installation3When the package has loaded, you may be prompted to install the diskette again.Do not reinsert the IHV HBA diskette (or A

7-6Adaptec 7800 Family ManagerModify the New System File1Display the contents of the adsl20/adsl file or adsb20/adsb by typing the following and press

7-7SCO UnixWare InstallationRebuild the SCO UnixWare KernelTo rebuild the UnixWare kernel with the new changes, follow these steps:1Type the following

7-8Adaptec 7800 Family ManagerUsing SCO UnixWare and the Host AdapterThis section contains useful information on using SCO UnixWare and your host adap

7-9SCO UnixWare InstallationRemoving the DriverIf you no longer need the adsl20/adsl or adsb20/adsb driver, you can use the following procedure to rem

18 ASUS P2B-D/P2B-DS User’s ManualSystem MemoryIII. INSTALLATIONIII. INSTALLATIONDIMM Memory Installation ProceduresInsert the module(s) as shown. Be

7-10Adaptec 7800 Family ManagerThe following files will be deleted:/etc/conf/mdevice.d/adsl/etc/conf/pack.d/adsl/Driver.o /etc/conf/pack.d/adsl/space.

7-11SCO UnixWare InstallationTroubleshootingProblems and SolutionsMy computer crashes or displays panic messages during the bootup procedure!You may h

7-12Adaptec 7800 Family Manager[xxxxx003] Command completed with error[xxxxx004] Command completed with error [xxxxx005] Command completed with error[

7-13SCO UnixWare Installation[xxxxx021] Target device protocol errorAn unexpected event occurred during data transfer between the adapter and target d

7-14Adaptec 7800 Family Manager[xxxxx046] Target device did not respond to abort sequenceThe target device did not abort the command requested by the

7-15SCO UnixWare Installation[xxxxx098] Exceeded maximum number of host bus adaptersThe driver has detected more host bus adapters than is supported b

Index-1▼ ▼ ▼ ▼ IndexAAdapter ID 5-9ahslink command 6-4BBacking up the computer 7-4Backup 4-15Bit mask options 4-7, 4-10, 4-12Bootingfrom SCO UNI

Adaptec 7800 Family ManagerIndex-2LLoad command 4-4, 4-5, 4-12Lock status 4-14Logicial unit numbersee LUNLUN 2-8, 4-8, 4-11, 5-8Mmax_tags 4-17Miniport

Index-3IndexSScatter/gather 4-8, 6-12SCO UNIX 6-4alad 1-2, 6-1, 6-2, 6-3, 6-4, 6-5, 6-7, 6-12alad325 1-2, 6-1, 6-3, 6-7blad 1-2, 6-1, 6-2, 6-3, 6-4, 6

ASUS P2B-D/P2B-DS User’s Manual 193. Central Processing Unit (CPU)This motherboard provides two Single Edge Contact (SEC) slots for Pentium IIprocess

Adaptec 7800 Family ManagerIndex-4device manager 3-5driver installation 3-2–3-3miniport driver 3-5troubleshooting 3-5–3-8Windows NTadvanced configurab

ASUS P2B-D/P2B-DS User’s Manual2USER'S NOTICEProduct Name: ASUS P2B-D/P2B-DSManual Revision: 1.05 E269Release Date: September 1998No part of this

20 ASUS P2B-D/P2B-DS User’s ManualIII. INSTALLATIONCPUIII. INSTALLATIONInstalling the Pentium II Processor1. Connect the Heat Sensor Cable to JP4/JP5

ASUS P2B-D/P2B-DS User’s Manual 21III. INSTALLATIONCPUIII. INSTALLATION4. Mount the Heatsink: Place the SEC cartridge face down on a flat surface an

22 ASUS P2B-D/P2B-DS User’s ManualIII. INSTALLATIONCPUIII. INSTALLATION5. Insert the SEC Cartridge: Push the SEC cartridge’s two locks inward untilyo

ASUS P2B-D/P2B-DS User’s Manual 23III. INSTALLATIONRecommended HeatsinksThe recommended heatsinks for the Pentium II processor are those with three-pi

24 ASUS P2B-D/P2B-DS User’s ManualIII. INSTALLATIONExpansion CardsIII. INSTALLATIONWARNING! Unplug your power supply when adding or removing expansio

ASUS P2B-D/P2B-DS User’s Manual 25III. INSTALLATIONTo simplify this process, this motherboard complies with the Plug and Play (PnP)specification, whic

26 ASUS P2B-D/P2B-DS User’s ManualIII. INSTALLATIONConnectorsIII. INSTALLATION5. External ConnectorsIMPORTANT: Ribbon cables should always be connec

ASUS P2B-D/P2B-DS User’s Manual 27III. INSTALLATION3. Parallel Printer Connector (25-pin Female)You can enable the parallel port and choose the IRQ th

28 ASUS P2B-D/P2B-DS User’s ManualConnectorsIII. INSTALLATIONIII. INSTALLATION6. Universal Serial BUS Ports 1 & 2 (Two 4-pin Female)Two USB ports

ASUS P2B-D/P2B-DS User’s Manual 29III. INSTALLATION8. Hard Disk Activity LED (2-pin IDELED)This connector supplies power to the cabinet’s hard disk or

ASUS P2B-D/P2B-DS User’s Manual 3ASUS CONTACT INFORMATIONASUSTeK COMPUTER INC.MarketingAddress: 150 Li-Te Road, Peitou, Taipei, Taiwan 112Telephone: +

30 ASUS P2B-D/P2B-DS User’s ManualConnectorsIII. INSTALLATION10. IrDA-Compliant infrared module connector (5-pin IR)This connector supports the optio

ASUS P2B-D/P2B-DS User’s Manual 31III. INSTALLATIONConnectorsIII. INSTALLATION12. Wake-On-LAN (3-pin WOL)This connector connects to LAN cards with a

32 ASUS P2B-D/P2B-DS User’s ManualConnectorsIII. INSTALLATIONIII. INSTALLATION14. LED Lead (MSG.LED)This indicates whether a message has been receive

ASUS P2B-D/P2B-DS User’s Manual 33III. INSTALLATIONConnectorsIII. INSTALLATION21. Fast (50 pins)/Wide (68 pins)/Ultra2 (68 pins) SCSI ConnectorsThis

34 ASUS P2B-D/P2B-DS User’s Manual22. SB-Link™ Connector (6-1 pin DMA_HEADER) (optional/reserved)Using Intel’s PC-PCI and serialized IRQ protocols fou

ASUS P2B-D/P2B-DS User’s Manual 35III. INSTALLATIONPower ConnectionsIII. INSTALLATIONPower Connection Procedures1. After all jumpers and connections

ASUS P2B-D/P2B-DS User’s Manual36IV. BIOSFlash Memory WriterIV. BIOS SOFTWAREFlash Memory Writer UtilityThis motherboard has an onboard SCSI BIOS and

ASUS P2B-D/P2B-DS User’s Manual 37IV. BIOSFlash Memory WriterIV. BIOS SOFTWAREWhen prompted to confirm theBIOS update, press Y to start theupdate.2.

ASUS P2B-D/P2B-DS User’s Manual38IV. BIOSUpdating BIOSIV. BIOS SOFTWAREManaging and Updating Your Motherboard’s BIOSUpon First Use of the Computer Sy

ASUS P2B-D/P2B-DS User’s Manual 39IV. BIOS SOFTWARE6. BIOS SetupIV. BIOSBIOS SetupThe motherboard supports two programmable Flash ROM chips: 5-Vol

ASUS P2B-D/P2B-DS User’s Manual4CONTENTSI. INTRODUCTION 7How this Manual is Organized ... 7It

ASUS P2B-D/P2B-DS User’s Manual40IV. BIOS SOFTWAREIV. BIOSStandard CMOSLoad DefaultsThe “Load BIOS Defaults” option loads the minimum settings for t

ASUS P2B-D/P2B-DS User’s Manual 41IV. BIOS SOFTWAREIV. BIOSStandard CMOSTimeTo set the time, highlight the “Time” field and then press either <Pa

ASUS P2B-D/P2B-DS User’s Manual42IV. BIOS SOFTWAREIV. BIOSStandard CMOSAuto detection of hard disks on bootupFor each field: Primary Master, Primar

ASUS P2B-D/P2B-DS User’s Manual 43IV. BIOS SOFTWAREIV. BIOSBIOS FeaturesBIOS Features SetupThe “BIOS Features Setup” option consists of configuratio

ASUS P2B-D/P2B-DS User’s Manual44IV. BIOS SOFTWAREIV. BIOSBIOS FeaturesCPU Level 1 Cache / CPU Level 2 Cache (Enabled)These fields allow you to choo

ASUS P2B-D/P2B-DS User’s Manual 45IV. BIOS SOFTWAREIV. BIOSBIOS FeaturesPS/2 Mouse Function Control (Auto)The default of Auto allows the system to d

ASUS P2B-D/P2B-DS User’s Manual46IV. BIOS SOFTWAREIV. BIOSChipset FeaturesChipset Features SetupThe “Chipset Features Setup” option controls the con

ASUS P2B-D/P2B-DS User’s Manual 47IV. BIOS SOFTWAREIV. BIOSChipset Features16-bit I/O Recovery Time (1 BUSCLK) / 8-bit I/O Recovery Time (1 BUSCLK)T

ASUS P2B-D/P2B-DS User’s Manual48IV. BIOS SOFTWAREOnboard FDC Swap A & B (No Swap)This field allows you to reverse the hardware drive letter assi

ASUS P2B-D/P2B-DS User’s Manual 49IV. BIOS SOFTWAREIV. BIOSPower ManagementPower Management SetupThis “Power Management Setup” option allows you to

ASUS P2B-D/P2B-DS User’s Manual 5CONTENTSPower Management Setup... 49Details of Power Manageme

ASUS P2B-D/P2B-DS User’s Manual50IV. BIOS SOFTWAREIV. BIOSPower ManagementVideo Off Method (DPMS OFF)This field defines the video off features. The

ASUS P2B-D/P2B-DS User’s Manual 51IV. BIOS SOFTWAREIV. BIOSPower ManagementPWR Up On Modem Act (Enabled)This allows either settings of Enabled or Di

ASUS P2B-D/P2B-DS User’s Manual52IV. BIOS SOFTWAREPlug & Play / PCIIV. BIOSPNP and PCI SetupThe “PNP and PCI Setup” option configures the PCI bu

ASUS P2B-D/P2B-DS User’s Manual 53IV. BIOS SOFTWAREIV. BIOSPlug & Play / PCIDMA x Used By ISA (No/ICU)These fields indicate whether or not the d

ASUS P2B-D/P2B-DS User’s Manual54IV. BIOS SOFTWARELoad DefaultsIV. BIOSLoad BIOS DefaultsThe “Load BIOS Defaults” option allows you to load the trou

ASUS P2B-D/P2B-DS User’s Manual 55IV. BIOS SOFTWARESupervisor Password and User PasswordThese two options set the system passwords. “Supervisor Passw

ASUS P2B-D/P2B-DS User’s Manual56IV. BIOS SOFTWAREIV. BIOSHard Disk DetectIDE HDD Auto DetectionThis “IDE HDD Auto Detection” option detects the par

ASUS P2B-D/P2B-DS User’s Manual 57IMPORTANT: If your hard disk was already formatted on an older previous system,incorrect parameters may be detected

ASUS P2B-D/P2B-DS User’s Manual58V. SUPPORT S/WASUS Smart MotherbaordV. SUPPORT SOFTWAREASUS Smart Motherboard Support CDInserting the support CD br

ASUS P2B-D/P2B-DS User’s Manual 59VI. DESKTOP MANAGEMENTDesktop Management Interface (DMI)Introducing the ASUS DMI Configuration UtilityThis motherbo

ASUS P2B-D/P2B-DS User’s Manual6FCC & DOC COMPLIANCEFederal Communications Commission StatementThis device complies with FCC Rules Part 15. Operat

ASUS P2B-D/P2B-DS User’s Manual60VI. DMIUsing DMI UtilityVI. DESKTOP MANAGEMENTUsing the ASUS DMI Configuration UtilityNOTE: The following screen di

ASUS P2B-D/P2B-DS User’s Manual 61VI. DESKTOP MANAGEMENTSave MIFDYou can save the MIFD (normally only saved to flash ROM) to a file by entering thedr

ASUS P2B-D/P2B-DS User’s Manual62(This page was intentionally left blank.)

ASUS P2B-D/P2B-DS User’s Manual 63VII. ASUS LAN CardASUS PCI-L101 Fast Ethernet CardLAN ActivityOutput SignalRJ45LEDsMotherboard typeWake on LANOutpu

64 ASUS P2B-D/P2B-DS User’s ManualVII. ASUS LAN CardFeatures• Intel 82558 Ethernet LAN Controller (Fully integrated 10BASE-T/100BASE-TX)• Wake-On-LAN

ASUS P2B-D/P2B-DS User’s Manual 65VIII. SCSI SELECTConfiguring SCSIVIII. ADAPTEC SCSI SELECTConfiguring the SCSI AdapterAccess the SCSI BIOS by holdin

66 ASUS P2B-D/P2B-DS User’s Manual(This page was intentionally left blank.)

ASUS P2B-D/P2B-DS User’s Manual 67IX. ADAPTEC EZ-SCSIIX. EZ-SCSI UTILITYIntro/Quick StartWelcome to Adaptec EZSCSIVI, ADAPTEC EZ-SCSI UTILITY 4.03. Ad

68 ASUS P2B-D/P2B-DS User’s ManualIX. EZ-SCSI UTILITYTroubleshootingIX. ADAPTEC EZ-SCSITroubleshooting TipsSCSI Device TroubleshootingReview this chec

ASUS P2B-D/P2B-DS User’s Manual 69IX. ADAPTEC EZ-SCSIIX. EZ-SCSI UTILITYTroubleshootingIf the name of your SCSI chipset does not appear, you may be ab

ASUS P2B-D/P2B-DS User’s Manual 7How this Manual is OrganizedThis manual is divided into the following sections:I. Introduction Manual information and

70 ASUS P2B-D/P2B-DS User’s ManualIX. ADAPTEC EZ-SCSIIX. EZ-SCSI UTILITYTroubleshootingIf I am running under Windows95, do I need lines for the Adapte

ASUS P2B-D/P2B-DS User’s Manual 71IX. ADAPTEC EZ-SCSIIX. EZ-SCSI UTILITYDOS/Win Info.Information for DOS/Windows 3.1x UsersThe following information m

72 ASUS P2B-D/P2B-DS User’s ManualIX. ADAPTEC EZ-SCSIIX. EZ-SCSI UTILITYFormattingDOS Formatting UtilitiesAdaptec EZSCSI includes several DOS-based fo

ASUS P2B-D/P2B-DS User’s Manual 73IX. ADAPTEC EZ-SCSIIX. EZ-SCSI UTILITYPartitioningFormatter and Partitioner (afdisk)Use the DOS-based afdisk utility

74 ASUS P2B-D/P2B-DS User’s ManualIX. ADAPTEC EZ-SCSIIX. EZ-SCSI UTILITYPartitioning3. To create a new partition on the disk device, press Ins. A scre

R▼ ▼ ▼ ▼ Adaptec 7800 FamilyManager Setfor Windows NT, Windows 95,Novell NetWare, IBM OS/2,SCO UNIX,and SCO UnixWareUser’s Guide

Copyright© 1998 Adaptec, Inc. All rights reserved. No part of this publication may bereproduced, stored in a retrieval system, or transmitted in any f

iiiTechnical and Product Support For technical support and information about many of Adaptec’s electronic support services, call 800-959-7274 or 408-9

v▼ ▼ ▼ ▼ Contents1 IntroductionDevice Drivers 1-2Adaptec 7800 Family Host Adapters 1-3Requirements 1-52 Microsoft Windows NT InstallationInstall

8 ASUS P2B-D/P2B-DS User’s ManualFeaturesThe ASUS P2B-D/P2B-DS motherboards are carefully designed for the demanding PC userwho wants advanced feature

viAdaptec 7800 Family ManagerProblems and Solutions 3-54 Novell NetWare InstallationInstalling the Driver When Installing NetWare 4-2NetWare v3.1x 4-2

viiContents6 SCO UNIX InstallationInstalling the Driver When Installing SCO UNIX 6-2Installing SCO UNIX 3.2 v4.2, SCO ODT 3.0, or SCO OpenServer 3.0 6

viiiAdaptec 7800 Family ManagerTroubleshooting 7-11Problems and Solutions 7-11Error Messages 7-11Index❒

1-11▼ ▼ ▼ ▼IntroductionThe Adaptec® 7800 Family Manager Set v3.x is a set of software drivers and other files that enable your Adaptec 7800 Family

1-2Adaptec 7800 Family ManagerDevice DriversThe 7800 Family Manager Set has two driver files for each operating system; one for Ultra SCSI and earlier

1-3IntroductionAdaptec 7800 Family Host AdaptersThe following Adaptec PCI-to-SCSI host adapters are collectively referred to as the Adaptec 7800 Famil

1-4Adaptec 7800 Family ManagerAHA-3944UWD MultiChannel PCI-to-Wide Ultra Differential SCSI with Dual External ConnectorsAHA-3944AUWD MultiChannel PCI-

1-5IntroductionRequirementsThe following are the minimum and recommended requirements needed to install the Adaptec 7800 Family Manager Set: A PCI com

2-12▼ ▼ ▼ ▼Microsoft Windows NT InstallationThis chapter explains how to install the Adaptec 7800 Family Manager Set aic78xx.sys and aic78u2.sys dr

ASUS P2B-D/P2B-DS User’s Manual 9The ASUS P2B-D/P2B-DS MotherboardII. FEATURESII. FEATURESMotherboard PartsT: USB Port 1B: USB Port 2COM 2(Bottom)Pr

2-2Adaptec 7800 Family ManagerInstalling the Driver When Installing Windows NTA version of the aic78xx.sys driver(Ultra SCSI) driver is embedded (incl

2-3Microsoft Windows NT Installation5Press S to skip mass storage device detection. This allows you to manually select the driver for your host adapte

2-4Adaptec 7800 Family ManagerCompleting a Fresh Windows NT 4.0 Installation1Start your system with the Windows NT Boot Diskette in the floppy drive.2

2-5Microsoft Windows NT InstallationInstalling the Driver When Windows NT is Already InstalledTo update or install the aic78xx.sys or aic78u2.sys driv

2-6Adaptec 7800 Family Manager8If the following message appears, click New to replace the existing driver and skip to Step 10.The driver(s) for this S

2-7Microsoft Windows NT InstallationUpdating Windows NT 4.01Start Windows NT.2Click the Start button on the Windows NT task bar, and then point to Set

2-8Adaptec 7800 Family ManagerUsing Advanced Configurable ParametersAdvanced users may use software parameters to alter the configuration of the Windo

2-9Microsoft Windows NT Installation Maximum SGList— Specifies the maximum number of scatter-gather elements. Valid values are 17-255. The data type f

2-10Adaptec 7800 Family ManagerNote: Changes made with the Registry Editor do not take effect until you shut down and then restart your system.Using D

2-11Microsoft Windows NT InstallationTo enter driver-specific parameters, follow these steps:1Select Run from the File menu (Windows NT 3.5x), or Run