Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Uživatelský manuál stáhnout pdf (Strana 130)

4-14

Adaptec 7800 Family Manager

Mount Status

Mounting causes a drive to come online as a NetWare storage

device. Dismounted drives are inactive and cannot be accessed.

Before you eject your current media, you should first dismount it

(menu choice 5). When the media status is dismounted, you can eject

the media. However, NetWare does not allow you to dismount it if

the media is locked.

To insert your new media, wait for the drive to spin-up, and then

select the Drive Mount option.

Lock Status

If your removable-media device supports the Lock/Unlock feature,

you can lock the media (menu choice 6). The media must be in the

Not Locked state before you can eject it. If the media is Locked, it

cannot be ejected when you press the Eject button.

Verify (

aic7870.dsk

driver only)

Read After Write Verify (menu choice 2) is set to Hardware Level by

default. The option can also be set on the command line, see Using

the Load Command Line Options on page 4-7.

The available options are defined as follows:

Read After Write Verify

Option

Setting Function

Disabled All writes to SCSI disk drives are with the SCSI

Write command (2Ah).

Hardware

Level

All writes to SCSI disk drives are with the SCSI

Write and Verify command (2Eh). If not

supported by the drive, behavior is the same as if

Read After Write Verify is disabled. We

recommend this setting for best data security.

Software

Level

Not supported.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 189 190

Žádné komentáře

Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Uživatelský manuál Strana 130