Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka stáhnout pdf (Strana 75)

Troubleshooting the SIERRA™ plus film digitizer 73

VIDAR Film Digitizer Installation Guide

Cleaning the multi-film feed tray

After extensive use, dust or lint particles may build up on the feed roller

and idler wheels.

To remove residue, loop a piece of light adhesive tape (such as Scotch®

Magic™ Tape) around your fingers with the adhesive side out, then

gently pat the roller and wheels as you turn them.

CAUTION:



Do not

use any type of cleaning solvent on the feed roller

and idler wheels, as this could damage these components

and cause improper operation.



Do not

use tape with a strong adhesive, such as packing

tape or strapping tape.



Do not

use tape requiring the adhesive to be wetted, such as

brown paper packing tape.

Idler wheels

Feed roller

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 85 86

Žádné komentáře

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka Strana 75