Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka stáhnout pdf (Strana 19)

Configuring SCSI settings for the SIERRA™ plus film digitizer 17

VIDAR Film Digitizer Installation Guide

2. Set the digitizer’s SCSI termination.

The SIERRA™ plus is configured to be placed at the end of the SCSI

chain. The SCSI termination switch is preset at the factory to the on

position (termination activated).

Note:

VIDAR recommends that the Adaptec 2930CU SCSI

controller be used

only

for the digitizer. Do not connect internal

or external disk drives to the SCSI controller.

Note:

VIDAR

does not recommend

daisy-chaining multiple

SCSI devices with the film digitizer. If you are considering using

the digitizer in daisy-chain configurations, please contact VIDAR

Technical Support (medtech@vidar.com).

continued

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 85 86

Žádné komentáře

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka Strana 19