Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka stáhnout pdf (Strana 74)

Troubleshooting the SIERRA™ plus film digitizer 72

VIDAR Film Digitizer Installation Guide

Turning the digitizer on and off

WARNING

Do not apply power by plugging the DC power connector into

the digitizer while the power supply is live. Do not remove

power by unplugging the DC power connector from the digitizer

while the power supply is live. Either of these actions could

permanently damage the digitizer, the power supply or both.

Note:

SIERRA was designed to be powered continuously.

Under normal conditions, the digitizer should remain on at all

times.

Use only the power switch to turn the digitizer on or turn it off:

The power switch is located behind the upper right corner of the digitizer

(when viewed from the front).

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 85 86

Žádné komentáře

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka Strana 74