Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka stáhnout pdf (Strana 20)

Configuring SCSI settings for the SIERRA™ plus film digitizer 18

VIDAR Film Digitizer Installation Guide

To change the digitizer’s SCSI termination:

Note:

The SCSI termination switch is preset at the factory for

internal termination on

a. Lay the digitizer on its back, with its bottom surface toward you.

b. Locate the SCSI termination switch on the bottom of the digitizer.

c. Verify that Switch 1 is in the position

shown at the top right.

(Switch 2 has no function.)

Switch 1 set

for no internal

termination

Switch 1 set

for internal

termination

Factory (recommended)

termination switch setting

Not recommended

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Žádné komentáře

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Instalační příručka Strana 20