
SCSI Disk Arrays/RAID Controllers
American Megatrends MegaRAID 428
SCSI RAID Controller (DU 2)
Solaris Device Driver:
mega
Release/Version:
DU 2/1.04
Device Type:
SCSI RAID
Adapter:
American Megatrends MegaRAID 428 SCSI RAID
Bus Type:
PCI
Configuration Procedure
Contact American Megatrends to get the optional megamgr configuration utility.
The MegaRAID controller cannot be configured by editing the
/kernel/drv/mega.conf file.
Follow this procedure to configure and use more than one logical drive. If the
/kernel/drv/cmdk.conf file is not carefully edited, the system may panic
upon reboot.
1. Press Control-M while the system is starting up to configure the controller and
all logical drives.
2. Install the Solaris software and reboot.
You will only see a single logical drive available during installation.
3. Open /kernel/drv/cmdk.conf and add additional drives by duplicating the
existing entry for target=0 and incrementing the lun field by one for each
additional logical drive you want the Solaris software to recognize.
42
Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998
Komentáře k této Příručce