Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Instalační příručka

Device Reference Manual forSolaris 2.6 (Intel Platform Edition)Sun Microsystems, Inc.901 San Antonio RoadPalo Alto, CA 94303U.S.A.Part No: 805-3980-02

x Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998

Token Ring Network AdaptersIBM 16/4, Auto 16/4, Turbo 16/4 TokenRing and Compatible AdaptersSolaris Device Driver:trDevice Type:Network (Token Ring)Ad

16/4 Token Ring adapters (ISA):IRQ Level:3, 6, 7, 9I/O Address:0xA20, 0xA24If there are multiple adapters installed, do notoverlap them.Turbo 16/4 Tok

The Autosense parameter setting2. Set up the Token Ring so that:The first station has autosense DISABLED.All other stations can have autosense ENABLED.

Madge Smart 16/4 Token Ring (DU 1)Solaris Device Driver:mtokRelease/Version:DU 1/3.00.02Device Type:Network (Token ring)Adapters:Madge Smart 16/4 AT R

This release of the mtok driver does not support netbooting on Smart 16/4 Prestoadapters.The adapter may fail to open on the ring if not connected to

Audio CardsAnalog Devices AD1848 andCompatible DevicesSolaris Device Driver:sbproDevice Type:AudioChips:Analog Devices AD1848, Compatible Devices (onc

Compaq Deskpro XL Business Audio with built-in AD1847 chipTurtle Beach Tropez card with CS4231 chipSome other 100 percent hardware-compatible devices

The sbpro driver automatically chooses an unused DMA channel and IRQ linefor the device.Note - The sbpro support for the AD1848 and compatibles uses o

Although the sbpro driver supports A-law encoding on AD1848 and compatibledevices, audiotool(1) does not and produces an error message if you selectA-

Creative Labs Sound Blaster Pro, SoundBlaster Pro-2Solaris Device Driver:sbproDevice Type:AudioAdapters:Creative Labs Sound Blaster Pro,Sound Blaster

PrefaceThis document provides information about x86 hardware devices that are supportedin the SolarisTM2.6 computing environment. Typically, as new dr

• IRQ Level: 2, 5, 7,10• I/O Address:0x220, 0x240• DMA Channel: 0, 1,3Known Problems and LimitationsThe ISA version IBM Token Ring and compatible adap

Creative Labs Sound Blaster 16, SoundBlaster AWE32, Sound Blaster Vibra 16Solaris Device Driver:sbproDevice Type:AudioAdapters:Creative Labs Sound Bla

Defaults are shown in this typeface.• IRQ Level: 2, 5,7,10• I/O Address:0x220, 0x240, 0x260, 0x280• 8-bit DMA Channel: 0, 1,3• 16-bit DMA Channel:5,6,

PC Card (PCMCIA) HardwarePC Card AdaptersSolaris Device Driver:pcicAdapters:Intel i82365SLVadem VG365, VG465, VG468, VG469Cirrus Logic PD6710, PD6720R

Address space At least 8 Kbytes are required with 4 Kbytes per socketin the 640K-1MB range (not necessarily contiguous); ifthere are three sockets, at

# touch /reconfigure# reboot4. Insert the PC Card adapter and turn on the machine.5. Do a second reboot so that the PC Card device driver begins runni

3Com EtherLink III (3C562, 3C589) PCCardsSolaris Device Driver:pcelxDevice Type:Network (Ethernet)Adapter:3Com EtherLink III 3C562 (network, modem),Et

2. Boot the system.3. Insert the 3Com EtherLink III PC Card device.Identifying an Unrecognized CardIf you insert a 3C562 or 3C589 card and it isn’t re

Note - This process is described in TCP/IP and Data CommunicationsAdministration Guide.Special FilesDevice naming in /dev follows standard LAN device

Modem and Serial PC Card DevicesSolaris Device Driver:pcserDevice Type:Modem and serial PC Card devices based on the8250, 16550, or compatible UART at

instructions in this Driver Update supplement the instructions in Information Libraryfor Solaris 2.6 (Intel Platform Edition) and Solaris Advanced Ins

# prtconf -D...pcic, instance #0 (driver name: pcic)...pccard111.222 (driver not attached)3. If your device is not recognized “(driver not attached)”,

3. To work properly with the Solaris operating environment, all devices must beaccounted for, even those the Solaris environment does not support. The

SRAM and DRAM PC Card DevicesSolaris Device Driver:pcramDevice Types:Static RAM (SRAM), Dynamic RAM (DRAM)Bus Type:PC CardNote - Flash RAM devices are

Identifying an Unrecognized DeviceIf you insert a memory device and it isn’t recognized (no special files created), usethe prtconf command.1. Become ro

Note - A device name can be specified either by a partition name (p#) or a slicename (s#), but not both.Using PC Card Memory DevicesSince the Solaris V

Viper 8260pA, SanDisk Flash, or AnyPC Card ATA DevicesSolaris Device Driver:pcataDevice Type:ATA PC CardAdapters:Viper 8260pASanDisk FlashOr any PC Ca

2. Boot the system.3. Insert the PC Card ATA device.Identifying an Unrecognized CardIf you insert a PC Card ATA device and it isn’t recognized (no spe

# newfs /dev/rdsk/c#d#s#To mount a ufs file system, type:# mount -F ufs /dev/dsk/c#d#s# /mntFor more information, see the newfs(1M) and mount(1M) man p

CHAPTER 1Device Reference PagesThis manual describes how to use Device Reference Pages to configure your x86based system to run in the Solaris operatin

Using Device Reference PagesOnly devices that require special configuration for running Solaris Intel PlatformEdition have Device Reference Pages.Refer

Disk InterfaceIDE/Enhanced IDE Disk Controller(Including ATAPI CD-ROM)Solaris Device Driver:ataDevice Type:Hard disk or CD-ROM controllerSupported Con

• IRQ Level: 15• I/O Address: 0x170If an IDE CD-ROM drive is installed, the system BIOS parameter for that deviceshould be:• Drive Type: Not installed

Some systems may have problems booting from IDE drives that are larger than512 Mbytes, even though the install to the drive succeeds. Disable logical

SCSI Host Bus AdaptersAdaptec AHA-1510A, 1520A, 1522A,1530P, 1532P HBAsSolaris Device Driver:aicDevice Type:SCSIAdapters:Adaptec AHA-1510A, AHA-1520A,

Known Problems and LimitationsThe Adaptec AHA-1510A adapter cannot be a primary (boot) disk controller since ithas no BIOS. Boot from a disk attached

Copyright 1998 Sun Microsystems, Inc. 901 San Antonio Road, Palo Alto, California 94303-4900 U.S.A. All rights reserved.This product or document is pr

Creative Labs Sound Blaster 16 SCSI-2InterfaceSolaris Device Driver:aicDevice Type:SCSIAdapter:Creative Labs Sound Blaster 16 SCSI-2Bus Type:ISAPrecon

The SCSI interface on the Sound Blaster 16 SCSI-2 audio card cannot be used as aprimary (boot) disk controller since it has no BIOS. The system must b

Adaptec AHA-1540B, 1542B, 1542C,1542CF, 1542CP HBAsSolaris Device Driver:ahaDevice Type:SCSIAdapters:Adaptec AHA-1540, AHA-1542B, AHA-1542C,AHA-1542CF

• Synchronous Negotiation: Disabled for each CD-ROM drive target• Support for More Than Two DOSDrives:Disabled• Dynamically Scan SCSI Bus for BIOSDevi

Adaptec AHA-1640, 1642 HBAsSolaris Device Driver:ahaDevice Type:SCSIAdapters:Adaptec AHA-1640, AHA-1642Bus Type:Micro ChannelPreconfiguration Informati

Adaptec AHA-1740, 1742A HBAsSolaris Device Driver:ehaDevice Type:SCSIAdapters:Adaptec AHA-1740, AHA-1742ABus Type:EISAPreconfiguration InformationSuppo

Adaptec AHA-2740, 2742, 2740A, 2742A,2740T, 2742T, 2740AT, 2742AT, 2740W,2742W, 2840VL, 2842VL HBAsSolaris Device Driver:esaDevice Type:SCSIAdapters:A

For example, set the tape drive’s SCSI ID to 7 using jumpers or an external switch.Then set the AHA-274x SCSI ID to 6 using the ECU. (Use the configura

EISA slot plus 1. Thus in an EISA motherboard with three EISA slots, themotherboard AIC-7770 address is 0x4C00.The BIOS base address is selected from

Adaptec AHA-2940, 2940W, 2940U,2940U Dual, 2940UW, 2940UW Dual,2944W, 2944UW, 3940, 3940W, 3940U,3940UW, 3940AU, 3940AUW,3940AUWD, 3944AUWD HBAs (DU 3

ContentsPreface xi1. Device Reference Pages 1Third-Party Drivers 1Using Device Reference Pages 2Disk Interface 3IDE/Enhanced IDE Disk Controller (Incl

to “To ISA Legacy IRQs”. A similar workaround may apply to other motherboardswith problems supporting channel B.Another possible workaround is noted o

For older disk drives, tape drives, and most CD-ROM devices, make sure themaximum SCSI data transfer speed is set to 5.0 Mbps.Enable support for disks

AMD PCscsi, PCscsi II, PCnet-SCSI andQLogic QLA510 HBAsSolaris Device Driver:pcscsiDevice Type:SCSIAdapter:QLogic QLA510Chips:AMD 53C974 (PCscsi), 53C

BusLogic BT-742A, BT-746C, BT-747C,BT-747S, BT-757C, BT-757S, BT-542B,BT-545C, BT-545S, BT-440C, BT-445C,BT-445S HBAsSolaris Device Driver:blogicDevic

Configuration ProcedureModel names ending in “C” only: Run the BusLogic AutoSCSI configuration utilityand check the termination and that the Advanced op

BusLogic BT-946C, BT-956C HBAsSolaris Device Driver:blogicDevice Type:SCSIAdapters:BusLogic BT-946C, BT-956CBus Type:PCIPreconfiguration InformationIf

Known Problems and LimitationsUsing an I/O address of 0x330 causes the Solaris aha driver to be selected insteadof blogic native mode drivers. These c

Configure the IRQ and BIOS address values manually if your PCI motherboard isnot fully PCI-specification compliant. If the system hangs while installing

BusLogic FlashPoint LT Ultra SCSI,FlashPoint LW Ultra and Wide SCSI,FlashPoint DL Dual Channel Ultra SCSI,FlashPoint DW Dual Channel Ultra andWide SCS

Compaq 32-Bit Fast SCSI-2 ControllersSolaris Device Driver:ncrsDevice Type:SCSI-2Compaq Controller Chip Available OnCompaq 32-Bit Fast-SCSI-2 53C710 E

Adaptec AHA-2740, 2742, 2740A, 2742A, 2740T, 2742T, 2740AT, 2742AT, 2740W,2742W, 2840VL, 2842VL HBAs 14Preconfiguration Information 14Configuration Proc

Compaq 32-Bit Fast Wide SCSI-2, WideUltra SCSI, and Dual Channel WideUltra SCSI-3 Controllers (DU 3)Solaris Device Driver:cpqncrRelease/Version:DU 3/3

0 - Disabled (Default)1 - Enabledalrm_msg_enable: This property enables or disables Alarm messages due tofaults in the Compaq Storage system connected

DPT PM-2011, PM-2021, PM-2041W,PM-3021 HBAsSolaris Device Driver:dptDevice Type:SCSIAdapters:DPT PM-2011, PM-2021, PM-2041W, PM-3021Bus Type:ISAPrecon

Use edge-triggered interrupts on the PM-2011.The PM-2041W adapter’s SmartROM must be upgraded to at least version 3DL inplace of 3D0. The BIOS on adap

DPT PM-2012B HBASolaris Device Driver:dptDevice Type:SCSIAdapter:DPT PM-2012BBus Type:EISAPreconfiguration InformationSupported Settings• IRQ Level: An

a. Type DPTFMT and press Enter.b. Press Enter to begin, and again to continue.c. Press <F3> to enter SCSI ID 0 and LUN 0, and press <F3> t

IBM Micro Channel HBASolaris Device Driver:mcisDevice Type:SCSIAdapter:IBM Micro ChannelBus Type:Micro ChannelPreconfiguration InformationThe controlle

IBM Micro Channel SCSI-2 Fast/WideAdapter/ASolaris Device Driver:corvetteDevice Type: SCSIAdapter:IBM Micro Channel SCSI-2 Fast/Wide Adapter/ABus Type

NCR 53C710 HBAs (Siemens NixdorfPCE-5 SCSI)Solaris Device Driver:ncrsDevice Type:SCSIAdapters:NCR 53C710 (two embedded)Bus Type:EISAPreconfiguration In

Symbios Logic (also NCR) 53C810,53C810A, 53C815, 53C820, 53C825,53C825A HBAs (DU 1)Solaris Device Driver:ncrsRelease/Version:DU 1/2.1Device Type:SCSIA

Preconfiguration Information 30DPT PM-2012B HBA 32Preconfiguration Information 32Configuration Procedure 32IBM Micro Channel HBA 34Preconfiguration Inform

The Solaris ncrs driver does not support the Wide SCSI option. Some add-in53C8xx cards include connectors for both narrow cables (8-bit SCSI A cables)

Trantor T348 MiniSCSI Plus ParallelHBAsSolaris Device Driver:trantorDevice Type:SCSIAdapter:Trantor T348Preconfiguration InformationThe T348 ends in a

printer or Ethernet adapter, shut down the Solaris operating environment and turnoff the computer and any SCSI devices attached to the T348.With the p

Tricord Systems Intelligent SCSISubsystem HBAsSolaris Device Driver:issDevice Type:SCSIBus Type:EISAPreconfiguration InformationDon’t use a version of

SCSI Disk Arrays/RAID ControllersAmerican Megatrends MegaRAID 428SCSI RAID Controller (DU 2)Solaris Device Driver:megaRelease/Version:DU 2/1.04Device

For example, if you have a total of three logical drives configured on youradapter, you would add the following lines:name="cmdk" class="

Compaq SMART Array ControllerSolaris Device Driver:csaDevice Type:Disk ArrayAdapter:Compaq SMART Array ControllerBus Type:EISASystems Supported:Intern

Compaq SMART-2, SMART-2SL,SMART-2DH Array ControllersSolaris Device Driver:smartiiDevice Type:Disk ArrayAdapters:Compaq SMART-2, SMART-2SL, SMART-2DHA

DPT PM-2022, PM-2042W, PM-2122,PM-2142W SCSI and PM-3222,PM-3332UW SCSI RAID HBAsSolaris Device Driver:dptDevice Types:SCSI, SCSI RAIDAdapters:DPT PM-

Known Problems and LimitationsTo prevent system hangs caused by improper IDE emulation, the EISA!DPTA410.CFG file should be at least version 6E5. If it

Special Cases 47DPT PM-2024, PM-2044W, PM-2044UW, PM-2124, PM-2124W, PM-2144W,PM-2144UW SCSI and PM-3224, PM-3224W, PM-3334W, PM-3334UW SCSI RAIDHBAs

DPT PM-2024, PM-2044W, PM-2044UW,PM-2124, PM-2124W, PM-2144W,PM-2144UW SCSI and PM-3224,PM-3224W, PM-3334W, PM-3334UWSCSI RAID HBAsSolaris Device Driv

Supported Settings• I/O Address: AutoDevice Reference Pages 49

IBM PC ServeRAID SCSI HBASolaris Device Driver:chsDevice Type:SCSI RAIDAdapter:IBM PC ServeRAIDBus Type:PCIPreconfiguration InformationKnown Problems a

IBM SCSI-2 RAID Controller, SCSI-2Fast/Wide Streaming-RAID Adapter/Aand Mylex DAC960PD-Ultra,DAC960PD/DAC960P, DAC960PG,DAC960PJ, DAC960PL, DAC960ECon

Known Problems and LimitationsIf a SCSI disk drive is not defined to be part of any physical pack within a systemdrive, it is automatically labeled as

Graphics CardsDiamond Viper VLB, PCI, SE, Pro andIntergraph G91Solaris Device Drivers:p9000, p9100Device Type:Graphics accelerator cardsChips:Weitek P

Only the maximum resolution and horizontal and vertical frequencies supported bythe monitor are listed below. The kdmconfig program will display the l

MonitorMaximumResolution Hfreq (kHz)Vfreq(Hz)Nanao 9070u 1024x768 48.4 60.0Nanao 9080i 1152x900 56.8 60.3Nanao 9500 1152x900 56.8 60.3Nanao T550i 1280

Ethernet Network Adapters3Com EtherLink 16 (3C507)Solaris Device Driver:elinkDevice Type:Network (Ethernet)Adapter:3Com EtherLink 16 (3C507)Bus Type:I

3Com EtherLink II (3C503), EtherLinkII/16 (3C503-16)Solaris Device Driver:elDevice Type:Network (Ethernet)Adapters:3Com EtherLink II (3C503), EtherLin

Preconfiguration Information 65Configuration Procedure 65DEC 21040, 21041, 21140, 21142, 21143 Ethernet (DU 3) 67Preconfiguration Information 67Intel Eth

3Com EtherLink III (3C509, 3C509B,3C59x)Solaris Device Driver:elxDevice Type:Network (Ethernet)Adapters:3Com EtherLink III (3C509, 3C509B, 3C59x)Bus T

3Com EtherLink XL (3C90x, 3C90xB)(DU 3)Solaris Device Driver:elxlRelease/Version:DU 3/2.1Device Type:Network (Ethernet)Adapters:3Com EtherLink XL (3C9

AMD PCnet Ethernet (PCnet-ISA,PCnet-PCI, PCnet-PCI II, PCnet-Fast),Allied Telesyn AT-1500, MicrodyneNE2500plus, Cabletron E-2210 (DU 1)Solaris Device

On some systems, particularly those with PCI controllers, IRQ 9 may not be usableby a PCnet-ISA adapter; configure the adapter to use another interrupt

Compaq NetFlex-2 DualPort ENET,NetFlex-2 ENET-TR ControllersSolaris Device Driver:nfeDevice Type:Network (Ethernet and token ring)Adapters:Compaq NetF

The default setting (DB-9) on the NetFlex-2 ENET-TR needs to be changed.2. Compaq NetFlex-2 ENET-TR card only: Configure this card to use a 10-Mbpsdata

Compaq NetFlex-3, NetelligentControllersSolaris Device Driver:cnftDevice Type:Network (Ethernet)Adapters:Compaq NetFlex-3/E, NetFlex-3/P and:10BASE-T

Preconfiguration InformationInsert a 10BASE-T UTP, 10/100BASE-TX UTP, 100BASE-FX, or 100VG-AnyLANUTP module into the NetFlex-3 PCI or EISA controller b

2. Modify the driver configuration file/platform/i86pc/kernel/drv/cnft.conf.This file specifies the valid configurable parameters for the driver:duplex_mod

DEC 21040, 21041, 21140, 21142, 21143Ethernet (DU 3)Solaris Device Driver:dnetRelease/Version:DU 3/2.1Device Type:Network (Ethernet)Adapters:DEC 21040

Xircom Pocket Ethernet (PE3 and PE2) 87Preconfiguration Information 87Token Ring Network Adapters 88IBM 16/4, Auto 16/4, Turbo 16/4 Token Ring and Comp

Name/Model Part/Version Chip21xxx10MBMedia100MBMediaNotesCogent EM110TX 110001-02 06 140AB T XCogent EM110TX 110001-03 01 140AB T XCogent EM110TX 1100

Name/Model Part/Version Chip21xxx10MBMedia100MBMediaNotesKingston KNE100TX 9920219-002.B00 140AC T X DLinksys LNE100TX 8EFPCI01..B1-1 140AB T X 7Links

Name/Model Part/Version Chip21xxx10MBMedia100MBMediaNotesZnyx ZX346 QUAD SA0026 X1 140AC T X AZnyx ZX348 DUAL SA0028 X2 140AC T X B10MB Media Codes:T—

Intel EtherExpress 16, 16C, 16TP , MCA,MCA TP (82586)Solaris Device Driver:ieeDevice Type:Network (Ethernet)Adapters:Intel EtherExpress 16, 16C, 16TP

Intel EtherExpress Flash32 (82596)Solaris Device Driver:ieefDevice Type:Network (Ethernet)Adapter:Intel EtherExpress Flash32 (82596)Bus Type:EISAConne

Intel EtherExpress PRO (82595),EtherExpress PRO/10+ (82595FX)Solaris Device Driver:eeproDevice Type:Network (Ethernet)Adapters:Intel EtherExpress PRO

Intel EtherExpress PRO/100 (82556)Solaris Device Driver:ieefDevice Type:Network (Ethernet)Adapter:Intel EtherExpress PRO/100 (82556)Bus Types:EISA, PC

Novell NE2000, NE2000plus Ethernet,and CompatiblesSolaris Device Driver:neiDevice Type:Network (Ethernet)Adapters:Novell NE2000, NE2000plus, Compatibl

• IRQ Level: 3, 4, 5, 9, 10, 11, 12, 14, 15• I/O Address: 0x200, 0x220, 0x240, 0x260, 0x280, 0x2C0, 0x300, 0x320,0x340, 0x360NE2000plus:• IRQ Level: 3

For NE2000 compatibles that do not operate at all combinations of I/O addressand IRQ settings, use the default values of IRQ 3 and I/O address 0x300.N

SRAM and DRAM PC Card Devices 110Preconfiguration Information 110Configuration Procedure 110Viper 8260pA, SanDisk Flash, or Any PC Card ATA Devices 113P

Novell NE3200 EthernetSolaris Device Driver:neeDevice Type:Network (Ethernet)Adapter:Novell NE3200Bus Type:EISAConnectors:RJ-45, BNC, AUIPreconfigurati

Racal InterLan ES3210, ES3210 TPEthernetSolaris Device Driver:rilesDevice Type:Network (Ethernet)Adapters:Racal InterLan ES3210, ES3210 TPChip:Nationa

If you choose DMA channel 5, 6, or 7, network performance will degrade.Change the default Shared Memory Disabled setting and provide an explicitaddres

SMC Elite32 (8033)Solaris Device Driver:smceDevice Type:Network (Ethernet)Adapter:SMC Elite32 (8033)Bus Type:EISAConnectors:One board type has an AUI

SMC Elite32C Ultra (8232)Solaris Device Driver:smceuDevice Type:Network (Ethernet)Adapter:SMC Elite32C Ultra (8232)Bus Type:EISAConnectors:RJ-45, AUI,

SMC Ether 10/100 (9232)Solaris Device Driver:smcfDevice Type:Network (Ethernet)Adapter:SMC Ether 10/100 (9232)Bus Type:EISAConnector:RJ-45Preconfigurat

SMC EtherEZ (8416), EtherCard Elite16Ultra (8216), EtherCard PLUS Elite(8013), EtherCard PLUS Elite 16 (8013),EtherCard PLUS (8003), EtherCard Elite32

I/O Address IRQ Base Memory Address (Board RAM)0x260 5 0xE00000x380 7 0xD4000Known Problems and LimitationsThe boards will only work in memory-mapped

SMC EtherPower II 10/100 (9432)(DU 3)Solaris Device Driver:spwrRelease/Version:DU 3/2.1Device Type:Network (Ethernet)Adapter:SMC EtherPower II 10/100

Xircom Pocket Ethernet (PE3 and PE2)Solaris Device Driver:peDevice Type:Network (Ethernet)Adapters:Xircom Pocket Ethernet (PE2 and PE3)Port:Attach to