
Creative Labs Sound Blaster 16 SCSI-2
Interface
Solaris Device Driver:
aic
Device Type:
SCSI
Adapter:
Creative Labs Sound Blaster 16 SCSI-2
Bus Type:
ISA
Preconfiguration Information
Supported Settings
If your card supports Plug and Play, your device resources are configured
automatically. Use the following settings for devices that don’t support Plug and Play.
• IRQ Level: 9, 10, 11, 12
• I/O Address: 0x140, 0x340
• DMA Channel: Disabled
Note - The SCSI subsystem of the Sound Blaster 16 SCSI-2 needs an I/O (port)
address and an IRQ that are distinct from those of the audio subsystem. The resistors
on the Sound Blaster 16 SCSI-2 cannot be removed. Set the jumpers for the SCSI
interface, not for the audio.
Known Problems and Limitations
The aic device driver is used to drive only the SCSI controller on this card. The
audio portion of the Sound Blaster 16 SCSI-2 requires a separate Solaris device
driver (sbpro) for operation.
8
Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998
Komentáře k této Příručce