Adaptec SATA AND SCSI RAID CONTROLLERS Uživatelský manuál Strana 78

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 165
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 77
A-16
Adaptec RAID Configuration Utility (ARC)
Viewing the Event Log
The BIOS-based event log stores all firmware events (configuration
changes, array creation, boot activity, and so on).
The event log has a fixed size. Once full, old events are flushed as
new events are stored. Also, the log is volatile; therefore, it is
cleared after each system restart.
To access the event log:
1 Restart the computer, then press Ctrl+A when prompted to
access the ARC utility.
2 If multiple controllers are installed, select the controller you
want to configure, then press Enter.
3 From the ARC menu, press Ctrl+P.
The Controller Service Menu appears.
4 Select Controller Log Information, then press Enter. The
current log is displayed.
Zobrazit stránku 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 164 165

Komentáře k této Příručce

Žádné komentáře