Adaptec AVA-2825 Instalační příručka stáhnout pdf (Strana 8)

AVA-2825 Installation Guide

Part Number: 510612-00, Rev A

Print Spec Number: 492733-00

Current Date: 6/8/94 ECN Date: 6/14/94

Setting SCSI IDs

Be sure that each device on the AVA-2825 SCSI bus

has a different SCSI ID. See your SCSI peripheral doc-

umentation to learn how to determine the SCSI ID

and change it.

■ The default SCSI ID for the AVA-2825 host

adapter is SCSI ID 7. You can change the ID with

the SCSISelect utility, if necessary. (See Configuring

the Host Adapter on page 8.)

■ We recommend that you assign SCSI IDs 0 and 1

to the first two SCSI hard disk drives in your PC.

Connecting Floppy Drives

Follow these steps if you are connecting your PC’s

floppy disk drives to the AVA-2825 onboard floppy

controller:

1 Disconnect the 34-pin floppy ribbon cable from

the PC’s floppy controller.

2 Connect the floppy ribbon cable to the host

adapter’s onboard floppy connector. Be sure to

maintain pin-1 orientation.

3 Disable the PC’s floppy controller. See page 3 for

more information.

Connecting IDE Drives

Follow these steps if you are connecting IDE disk

drives to the AVA-2825 IDE controller:

1 If the IDE drives are already installed in your PC,

disconnect the 40-pin IDE ribbon cable from the

PC’s IDE controller.

If you are installing new IDE drives, connect the

IDE cable to the drives, as described in the drive

manufacturer’s documentation.

2 Connect the end of the IDE ribbon cable securely

to the AVA-2825 onboard IDE connector. Be sure

to maintain pin-1 orientation.

3 Disable the PC’s IDE controller. See page 3 for

more information.

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Adaptec AVA-2825 Instalační příručka Strana 8