Adaptec 29320-R SCSI Card Instalační příručka stáhnout pdf (Strana 2)

The Adaptec SCSI Card 29320 enables you to connect up to 15

Low Voltage Differential (LVD) and/or 15 Single-Ended (SE)

SCSI devices—such as very large arrays of high-performance

hard disk drives, external storage subsystems, Ultra320/160 hard

disk drives, scanners, and CD-ROM drives—to any Intel-based

computer with 64- or 32-bit PCI/PCI-X expansion slots.

The Adaptec SCSI Card 29320 has one internal and one external

68-pin LVD/SE connector and two internal SE SCSI connectors

(one 68-pin and one 50-pin).

Although the Adaptec SCSI Card 29320 is a 64-bit PCI/PCI-X

card, it also works in a 32-bit PCI slot. When installed in a 32-bit

PCI slot, the card automatically runs in the slower 32-bit mode.

This installation guide explains how to:

•Install the Adaptec SCSI Card 29320

•Set up SCSI devices

•Connect SCSI devices

INTRODUCTION

If you connect Wide Ultra/Ultra SCSI devices to the

same SCSI connectors as Ultra320/160 and Ultra2 SCSI

devices, the data transfer rate for the Ultra320/160 and Ultra2

SCSI devices will drop to Ultra SCSI performance levels.

Attach only Ultra320/160 and Ultra2 SCSI devices to the

LVD/SE connectors to achieve maximum data transfer rates.

68-pin external

LVD/SE connector

68-pin internal LVD/SE

connector

68-pin internal SE

connector

50-pin SE

connector

NOTE

ASC-29320 IG.fm Page 1 Wednesday, August 14, 2002 2:00 PM

1 2 3 4 5 6 7 ... 13 14

Žádné komentáře

Adaptec 29320-R SCSI Card Instalační příručka Strana 2