Adaptec ASH-1233 Uživatelská příručka stáhnout pdf (Strana 10)

Installation Checklist

To successfully install your Adaptec ASH-1233 adapter and ATA

disk drives, perform these tasks, in order:

1 Install the ASH-1233 adapter. (See the next section below.)

2 Prepare your disk drives. (See page 5.)

Connect your disk drives to the ASH-1233 adapter. (See page 6.)

4 Mount your disk drives and connect power and LED cables.

(See page 8.)

5 Install the device drivers. (See page 9.)

Installing Your Adaptec ASH-1233 Adapter

You can install your Adaptec ASH-1233 adapter into a 32-bit or

64-bit PCI expansion slot.

Note: If you are installing the adapter into an existing system,

back up all data before continuing.

To install the ASH-1233 adapter:

1 Discharge any static electricity build-up before handling the

ASH-1233 adapter by touching a grounded metal object (such

as the exposed metal parts on the back of your computer).

Caution: Always handle the adapter by its edges or metal

bracket. Do not touch the gold PCI connector or any

components on the adapter.

2 Turn off power to the computer and disconnect the power cord.

Open the computer cabinet, following the manufacturer’s

instructions.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Žádné komentáře

Adaptec ASH-1233 Uživatelská příručka Strana 10