Adaptec 1210SA - Serial ATA RAID Controller Uživatelská příručka stáhnout pdf (Strana 73)

A-8

BIOS Utilities

Using the CCU

To access the Controller Configuration Utility (CCU):

1 Turn on your computer and press Ctrl+A when prompted to

access the ARC utility.

2 If multiple controllers are installed, select the controller you

want to configure and press Enter.

3 From the ARC menu, select SATASelect.

The Controller Configuration and SATA Configuration menu

options are displayed.

4 Select Controller Configuration.

You can modify the following Controller Interface options:

■ Runtime BIOS—Enables or disables the controller’s

runtime BIOS. The BIOS must be enabled if you want to boot

from the controller.

If Runtime BIOS is enabled and the Array-based BBS

Support option is disabled, the controller BIOS is enabled

and will post the first array (or drive) attached to the

controller as a bootable hard disk drive.

The default is Enabled.

■ Array-Based BBS Support—If Runtime BIOS, and this

option are enabled, all devices (array or drives) on each

controller in the system are posted as BBS devices.

In a BBS-enabled system, if array-based BBS support is

enabled, the Hard Drive Boot order menu includes entries

for all arrays (or drives) connected to the installed RAID

controllers.

The default is Enabled.

■ Physical Drives Display during POST— The default is

Disabled.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

Žádné komentáře

Adaptec 1210SA - Serial ATA RAID Controller Uživatelská příručka Strana 73