Adaptec 19160 - SCSI Card Storage Controller U160 160 MBps Instalační příručka stáhnout pdf (Strana 19)

Using the Adaptec SCSI Card 19160 and SCSI Devices

Using Ultra160 Hard Disk Drives

■

We recommend keeping your Ultra160 SCSI devices separate

from your non-Ultra160 SCSI devices. Connecting a non-

Ultra160 SCSI hard disk drive to the Ultra160 SCSI connector

on the Adaptec SCSI Card 19160 causes the Ultra160 SCSI

segment of the SCSI bus to drop down to Ultra SCSI

performance levels (40 MBytes/sec).

■

Be sure to connect your Ultra160 SCSI hard disk drives to the

LVD/SE SCSI connectors on the Adaptec SCSI Card 19160 if

you want Ultra160 performance (160 MBytes/sec)

■

Internal Ultra160 SCSI devices come from the factory with

termination disabled and cannot be changed. Proper

termination is provided by the terminator at the end of the

internal Ultra160 SCSI cable.

Using Scanners

If you connect a scanner to the Adaptec SCSI Card 19160, you must

install the scanner manufacturer’s proprietary software drivers. See

your scanner’s documentation for details.

50-pin Internal Fast/

Ultra-SE Connector

50-pin External

High Density Fast/

Ultra-SE Connector

68-pin Internal LVD/SE

Connector

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Žádné komentáře

Adaptec 19160 - SCSI Card Storage Controller U160 160 MBps Instalační příručka Strana 19