Adaptec 2940U2W Instalační příručka

Procházejte online nebo si stáhněte Instalační příručka pro Sériové rozvaděče Adaptec 2940U2W. Adaptec 2940U2W Installation guide [en] Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 14
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
1
INTRODUCTION
With SCSI Card 2940U2W, you can connect up to 15 SCSI peripherals,
such as hard disk drives, scanners, CD-ROM drives, tape drives, to any
IBM-compatible computer with PCI expansion slots.
This installation guide provides instructions for:
Installing the SCSI Card 2940U2W
Connecting SCSI peripherals
Installing SCSI Card 2940U2W software
See the
SCSI Card 2940U2W User’s Reference for additional informa-
tion on using the SCSI Card 2940U2W.
Check the Kit Contents
Your SCSI Card 2940U2W kit should contain the following items:
SCSI Card 2940U2W
High-density 68-pin Internal Ultra SCSI Cable
Standard 50-pin Internal Ultra SCSI Cable
High-density 68-pin Internal Ultra2 SCSI Cable
Standard 50-pin Internal-to-High-density
50-pin External Ultra SCSI Cable (With
Two Internal Connectors)
Manuals
Disks and
CD-ROM
Zobrazit stránku 0
1 2 3 4 5 6 ... 13 14

Shrnutí obsahu

Strany 1 - INTRODUCTION

1INTRODUCTIONWith SCSI Card 2940U2W, you can connect up to 15 SCSI peripherals,such as hard disk drives, scanners, CD-ROM drives, tape drives, to anyI

Strany 2 - AIC-7890

10STEP 5STEP 6STEP 7STEP 8Connect one end of the externalSCSI cable to the 50-pin externalconnector on the internal-to-external cable.Connect the othe

Strany 3 - Slot Cover

11STEP 168-pin External Ultra2 SCSI ConnectorUse the 68-pin external Ultra2 SCSI connector to connect your exter-nal Ultra2 peripherals. Ultra2 extern

Strany 4 - SETTING UP SCSI PERIPHERALS

12To install the SCSI Card 2940U2W software (software driver), go tothe section below for the operating system (for example, Windows®95) installed on

Strany 5 - CONNECTING SCSI PERIPHERALS

13© 1997, Adaptec, Inc. All rights reserved.Printed in SingaporeStock No.: 511794-00, Rev. A RQ 12/97We move the information thatmoves your world.™RCo

Strany 6

INSTALLATIONGUIDESCSI CARD 2940U2WA D A P T E C

Strany 7

2Bus Segments on the SCSI Card 2940U2WThe SCSI Card 2940U2W features Adaptec SpeedFlex™ technology.SpeedFlex technology ensures that you get the most

Strany 8

3Discharge any static electricity build-up before handling your SCSIcard by touching a grounded metal object (like the exposed metalparts on the back

Strany 9

4Insert the SCSI Card 2940U2W into the PCI expansion slot; pressdown firmly until it clicks into place, then replace the slot cover screw.SCSI Card 29

Strany 10

5A total of 15 SCSI peripherals can be connected to the SCSI Card2940U2W. Before connecting peripherals to the SCSI Card 2940U2W,be sure to also revie

Strany 11 - SCSI Connector

6Plug the remaining connectors to your internal Ultra2 SCSI peripherals.STEP 3STEP 1Connect to SCSI Card 2940U2WConnect to Fast/Wide UltraPeripheral (

Strany 12 - Peripheral

750-pin Internal Ultra SCSI ConnectorUse the 50-pin internal Ultra SCSI connector to connect internal orexternal Fast/Ultra Narrow SCSI peripherals th

Strany 13 - Computers with Windows NT

8Plug the other end of the cable to a terminated Fast/UltraNarrow SCSI peripheral.To connect a second Fast/Ultra NarrowSCSI peripheral, plug the middl

Strany 14 - INSTALLATION

9Secure the mounting bracket of the cable to the exposed card slotopening in the chassis of the computer.STEP 2STEP 3STEP 4Remove an available slot co

Komentáře k této Příručce

Žádné komentáře